Robotic Headlight Tester

Automatic Headlight Tester KSB-600A:

Automatic Headlight Tester KSB-600A KSB-600A Robotic Headlight Tester is applied as an AUTOMATIC measuring device for inspecting automobile headlamps. Its testing ability covers high beam luminous intensity, high beam offset; low beam offset; headlamp benchmark center height etc. The device meets the national standard GB7258, GB 21861, GB18565 and other related technical requirements by vehicle testing organizations. This device is largely used in vehicle testlines, vehicle repairing shops, and automobile manufactories etc.


Features Of Automatic Headlight Tester:

  • State-of-art appearance design, high-speed DSP6000 image processing technology, automaticly searching for headlamp high beam, accurate detection for low beam;
  • Dual CCD technology, independent testing, allow to adjust automobile headlamp low beam;
  • Multi-point auxiliary light searching system, special CCD light searching to speed up the inspection;
  • Double positioning system effectively prevent interference;
  • Standard RS232 interface, reliable networking software and rich communication instruction;
  • Bright digital display system;
  • Support line adjustment mode;
  • Support Dual-lamp inspection mode available to shortern inspection speed.

Specification Technical:

  • Environmental conditions:
    • Temperature: -5°C ~ 40°C
    • Relative Humidity: ≤90%
  • Light Intensity: 0 - 120.000cd
  • Deviation of Optical Axis:
    • High Beam: Vertical: (Up) 400mm/10m ~ (Down) 560mm/10m
    • Horizontal: (Left) 560mm/10m ~ (Right) 560mm/10m
    • Low Beam: Vertical: (Up) 400mm/10m ~ (Down) 560mm/10m
    • Horizontal: (Left) 560mm/10m ~ (Right) 560mm/10m
    • Central Height of Photovoltaic Box: ±10mm
  • Inspection Distance: 50 - 120cm
  • Inspection High: 350 - 1400mm
  • Length of the guide rail: 5m
  • Measurement Accuracy:
    • Luminous intensity: 10%
    • Optical axis deviation: 32mm/10m
  • Power Supply: AC220V 10%, 50Hz 1%
  • Power Consumtion: 200W
  • Weight: 100Kg
  • Dimension: 800mm (L) 670mm (W) 1700mm (H)
  • Can be integrate with another equipment by VIS Control System

Download Download (PDF)

Digital Headligh Tester →


hit counter